XM Satellite Radio Digital Audio Player
with vehicle kit
Important: This manual contains important safety and operating information. Please read, understand,
and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or
damage to your SKYFi3, accessories, and/or to your vehicle or property.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference
that may cause undesired operation.
Need help?
Call us at ꢀ.877.GO.DELPHI
Monday through Friday from 8:00 a.m. - 8:00 p.m. EasternTime
Saturday and Sunday from 10:00 a.m. - 4 :00 p.m EasternTime
Note: Extended seasonal hours may be available.
The SKYFi3 Satellite Radio Receiver incorporates an FM transmitter and is
therefore classified as an intentional transmitter. Changes or modifications
to the unit not expressly approved by Delphi can void your authority to
operate this equipment.
Thank you for purchasing a Delphi SKYFi3®. We’ve designed many thought-
ful features into this radio to ensure that your level of listening enjoyment is
the very best it can be.
Warning:The FCC and FAA have not certified the Delphi SKYFi3
Satellite Radio Receiver for use in any aircraft (neither portable nor perma-
nent installation).Therefore, Delphi cannot support this type of application
or installation.
In the event that you have questions or trouble getting started with your
new radio, please do not return to the store. Call us first! We can help.
Please install the latest software update.You may also refer to the Software
Update insert and theTroubleshooting section of the user guide for more
information.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death
All features and functions are subject to change without notice.
To ensure you have the latest features and satellite service compatibility,
product. Delphi recommends that you check for any updates before using
the SKYFi3.You will need the Radio ID of your SKYFi3.You can find this num-
ber on the bottom of the receiver and on the box.
ꢀ
ActivatingYour SKYFi3
Controls
Display
Earbud
Jack
MicroSD
Slot
1. Set up your player, car cradle, and antenna.
2. Turn the unit on and make sure it is in “Live XM” mode.
3. Use the arrow buttons to find channel 0, then push the Select button to
choose it. You should see an 8-character XM Radio ID on the display (the
XM Radio ID should also be on the bottom of your SKYFi3 and on the
package).
Volume
4. Write the XM Radio ID here:
Hold
Menu
Slide the switch
down to lock the
controls.
Display the main
menu of functions:
Record, Bookmarks,
Favorites, My
Note: Please check your ID code carefully.There is no “I” (eye), “o” (oh), “S” or “F” used.
You may wish to double-check your ID code on the outside of your tuner box.
Arrow Keys
Music, Settings.
Select menu entries,
change channels, skip
through songs, change
categories, and more...
5. Activate your XM Satellite Radio service by contacting XM at
(1.800.967.2346). You will need your XM Radio ID and a major credit
card.
Display
Press to change the
display appearance.
Press & Hold to
Play/Pause
change the display
from vertical to hori-
zontal orientation.
XM will send a signal from the satellites to activate the full channel lineup.
Activation normally takes 10 to 15 minutes, but during busy periods, you
may need to keep your SKYFi3 on for up to an hour to complete your activa-
tion process. When you can access the full channel lineup on your SKYFi3,
you’re done.
Mode/Power
Press to change modes:
Live XM, My Music, and
Aux. Press & Hold to
power on and off.
Main Connector
For connecting SKYFi3 to car, home
cradles, and additional accessories.
USB Connector
For connecting SKYFi3 to your PC
TOTURN ONTHE UNIT: Press & Hold the Mode/Power button.
Use the left arrow key to exit or go to the previous menu.
ꢁ
3
Table of Contents
Contents
The Delphi SKYFi3 is the best XM satellite radio featuring the best combina-
tion of performance and safety when used in the vehicle along with portable
listening capabilities. SKYFi3 is best in class in the vehicle—yet completely
portable for stored music listening.
ActivatingYour SKYFi3.................................. 2
Controls ......................................................... 3
About Delphi ................................................. 6
About XM ...................................................... 6
Listening to My Music................................ 3ꢂ
AccessingYour Music................................. 35
OrganizingYour Music................................ 37
Playlists........................................................ 37
Deleting Songs............................................ 39
Locking Songs............................................. 39
Selecting Multiple Songs........................... 40
• Plug-n-Play architecture with integrated XM tuner provides live XM listen-
ing when docked to a number of compatible Delphi accessories.
Getting Started............................................. 7
Some Important Reminders......................... 7
Features......................................................... 8
Controls - SKYFi3 Player ............................. 10
Controls - SKYFi3 inYour Vehicle ................11
Using SKYFi3 inYour Vehicle...................... 12
Display - Symbols and Icons ..................... 16
Display - Live XM Mode............................. 17
Display - My Music Mode .......................... 18
Remote Control........................................... 20
UsingYour SKYFi3 with an External
PersonalizingYour SKYFi3 .......................... ꢂꢀ
Making any FM Radio an XM Radio.......... 41
Menu Functions - Quick Reference............ 42
Display Settings.......................................... 44
Audio Settings............................................. 45
TuneSelect™ ............................................... 46
Info Extras ................................................... 47
Channel Access........................................... 49
Erase Memory............................................. 50
Resetting Factory Defaults ......................... 50
• Vehicle-centric design featuring vertical or horizontal orientation and the
largest display among all plug-n-play satellite radios.
• 30 minute pause-replay feature—the first and only XM portable satellite
radio with this feature!
Audio Source .............................................. 21
• Stores 10 hours of XM programming and up to 500 songs with optional
MicroSD cards.The first and only XM portable satellite radio to offer
MicroSD card compatibility.
Updating SKYFi3 Firmware........................ ꢁꢁ
The Firmware UpdateTool......................... 22
Using SKYFi3 andYour PC.......................... ꢃꢀ
System Requirements................................ 51
Setup............................................................ 52
Registering For XM+Napster ..................... 54
XM+Napster Features................................. 55
Listening to Live XM .................................. ꢁꢂ
Selecting Channels..................................... 24
Selecting Channels with the Car Cradle ... 25
Channel Browsing ...................................... 25
Direct Entry.................................................. 26
Favorites...................................................... 27
Category Browsing..................................... 28
Playing Live XM.......................................... 29
Replaying XM Content ............................... 29
• Portable playback mode—listen to stored XM or MicroSD card content
without running out of battery (with flexible recharging capabilities).
OtherThingsYou Should Know................. ꢃ8
Care.............................................................. 58
Accessories (sold separately) .................... 58
Troubleshooting.......................................... 59
Specifications.............................................. 63
Model Numbers.......................................... 64
ContactingTechnical Support..................... 64
• XM+Napster allows XM subscribers to listen to more than 70 XM music
channels on the XM Radio Online service and access Napster’s massive
catalog for on-demand listening, purchasing and downloading.
Recording Live XM ..................................... 3ꢀ
Recording a Single Song............................ 31
Recording a Channel .................................. 32
Scheduling a Recording Session............... 32
• Info Extras and StockTicker bring you personalized stock information,
sports scores and more!
Warranty...................................................... 6ꢃ
Delphi Limited Consumer Warranty
United States of America ........................... 65
Delphi Limited Consumer Warranty
• TuneSelect™ alerts you when your favorite song is being played on any
XM channel.
Canada......................................................... 68
ꢂ
ꢃ
Getting Started
About Delphi
Getting Started
Delphi is a world leader in mobile electronics, vehicle components, and
audio technology. Delphi created the first in-dash car radio in 1936 and con-
tinues its strong tradition of innovation in the audio industry. Now Delphi
technology has helped make satellite radio a reality, and Delphi continues to
expand its in-vehicle and consumer electronics technologies. With its excit-
ing line of satellite radio products, Delphi offers a broad portfolio of prod-
ucts to answer a wide variety of information and entertainment needs—in
the vehicle, home, office, or virtually anywhere.
Some Important Reminders
We know you are eager to begin using your SKYFi3. Please take a moment
to review the following:
Warning: This manual contains impor-
tant safety and operating information. Please
read, understand, and follow the instructions
in this manual. Failure to do so could result in
personal injury, death, and/or damage to your
SKYFi3, accessories, and/or to your vehicle or
property.
Caution: Use your SKYFi3 only with the
enclosed components or approved accessories.
Do not modify wires or other connectors in
any way; you could cause a malfunction, which
could damage your SKYFi3 and will void your
warranty.
About XM
XM Satellite Radio is the nation’s leading provider of satellite radio*. XM
broadcasts over 170 digital channels of totally new music, news, sports
and children’s programming direct to cars and homes via satellite and
its extensive repeater network, which supplements the satellite signal to
ensure seamless transmission. Subscribers pay a monthly fee for the XM
service. Exclusive programming on XM includes Major League Baseball®
games for every team, all season long. XM is broadcast via satellite from
coast to coast, so you can listen to XM continuously as you travel across the
country.
Warning:When using this product it
is always important to keep your eyes on
the road and your hands on the wheel. Not
doing so could result in injury and/or death
to yourself or to others and/or in property
damage. Do not use the earbuds while driving
an automobile or riding a bicycle - it is both
dangerous and against the law.
Caution: Refrain from using food or
drinks near your SKYFi3. Spilling food or drinks
on the unit can damage it. Also, improperly
installing the antenna cable can cause leaks,
which can damage your SKYFi3 and/or your
vehicle.
This product’s software can be updated and all features and functions are
subject to change without notice. Please check for online updates for your
SKYFi3.
SKYFi3 uses a MicroSD card (sold separately) to store digital audio files
(MP3/WMA). Delphi recommends using SanDisk brand SD cards for the
best performance. SKYFi3 accepts MicroSD cards up to 2 GB in capacity.
*To receive the XM service, you must subscribe to XM. Available in the continental United States and Canada
only. Satellite radio reception depends on the ability of the antenna to receive a signal.The signal may not be
available in buildings or if obstructed (e.g., by mountains, trees, bridges, etc).
Please make sure your battery is fully charged (three hours) before using
your SKYFi3 on battery power.
6
7
Getting Started
Features
Getting Started
SKYFi3 Player
SKYFi3 inYourVehicle
• Listen to Live XM when docked in the car or
home cradle (home kit sold separately).
• Listen to Live XM, recorded XM content and digital audio files
(MP3/WMA).
• Organize and manage your music.
• Listen to recorded XM content and digital audio
files (MP3/WMA).
• Organize and manage your music.
• Use station pre-sets via favorites keys.
• Portable Live XM with Wearable Live kit (sold
separately).
• Plug in external audio sources to play through your SKYFi3’s FM
Transmitter.
Line In
SKYFi3 and Your PC
• Transfer music to your SKYFi3 player.
• Organize and manage your music
using SKYFi3 or your PC.
• Purchase music from XM+Napster.
Line Out
8
ꢄ
Getting Started
Getting Started
Controls - SKYFi3 Player
Controls - SKYFi3 inYourVehicle
Earbud
Jack
MicroSD
Slot
Direct or Favorite
Press the center of this key
to cycle through favorites
or direct mode.
Display
Volume
Arrow Keys
Select menu entries,
change channels, skip
through songs, change
categories, and more...
Number Keys
Select the number
keys by pushing
the upper or lower
corner of the keys.
Play/Pause
Hold
Slide down to
lock controls.
Mode/Power
Press to change modes:
Live XM, My Music, Aux.
Press & Hold to power on
and off.
Set
Record
Press the center of
Press the center of
this key to record the
current song.
this key to save the
current channel as a
favorite.
Display
Menu
Press to change the
display appearance.
Press & Hold to
change from vertical
to horizontal
Display the main
menu of functions:
Record, Favorites,
Bookmarks, Set-
tings, My Music.
Press & Hold the Display button to change the display
orientation (portrait and landscape).
USB Connector
Power
Main Connector
ꢀ0
orientation.
ꢀꢀ
Getting Started
Getting Started
Using SKYFi3 inYourVehicle
Placing the Antenna
Your SKYFi3 can be mounted in your vehicle in either portrait or landscape
orientation.
Because all vehicles are different, there are many acceptable methods of
mounting the antenna and routing the cable.
Make sure the antenna is placed on a clean, dry surface
that is free of all debris.
Changing Display Orientation
Your SKYFi3 display can be changed from portrait to landscape orientation
For best reception, place the antenna on the vehicle’s
metallic roof, at least 6” from any window or sun roof.
by pressing and holding the Display button.
For safety, do not run the antenna wire across any
metal edges, through windows, or near seat tracks.
Look for foam rubber trunk and door seals for insula-
tion. If crossing a door seal, it is recommended that
this be done at the bottom or low point of the vehicle.
If necessary, use products such as adhesive or cable
tie mounts to control the antenna wire route.
If the car is a soft-top convertible, you may mount the antenna on the metal
trunk lid. It should be at least 4” from the rear window. Ensure that the
antenna and cable don’t interfere with the opening or closing of the
convertible top and trunk.
Landscape orientation
Portrait Orientation
Your SKYFi3 will default to the last orientation used in the
car cradle.
Caution: Use your SKYFi3 only with the enclosed components or approved accessories. Do not modify
wires or other connectors in any way; you could cause a malfunction, which could damage your SKYFi3 and
will void your warranty.
ꢀꢁ
ꢀ3
Getting Started
Getting Started
MountingYour SKYFi3
Vent Mount
Swivel Mount
Find an air vent that is strong enough to hold your SKYFi3 and its cradle.
Clip the vent mount on to the vent by pulling back on the spring arms.
Find a suitable location on the dash of your vehicle; the mount uses a
strong adhesive and could be difficult to reposition after installation. Do not
install this mount on a leather surface. Make sure the air temperature is at
least 60°F. Clean the mounting surface with the surface preparation cleaning
kit, following the directions on the package.
Peel away the adhesive liner and firmly
press the swivel mount to the surface for 30
seconds. For best results, do not touch or
apply any pressure to the vehicle mount for
5V DC
ANT
24 hours.
To remove the mount, lift the adhesive pad with your fingers or a spoon.
You may warm it with a hair dryer for 2 to 3 minutes to help soften the
adhesive. Remove any leftover adhesive from the dash surface by rubbing
with your finger, or use a mild cleaner as recommended by your vehicle’s
manufacturer.
To remove the mount, pull back on the spring arms and release the mount’s
hooks from the vent vanes. Carefully extract the mount.The mount can be
installed on horizontal or vertical vanes by turning the mount’s base.
Carefully insert the SKYFi3 player into the cradle. Connect the power and
antenna.
Caution: Never use a commercial heat gun or paint-stripping gun.This could result in damage
to the unit or to your vehicle.
Caution: DO NOT attempt to rotate your SKYFI3 while mounted with the vent mount. Doing so could
damage your vent louvers.
You can adjust the tension of the swivel mount by turning the tightening
wheel. The base of mount can be rotated to accommodate vertical and
horizontal surfaces.
Caution: If your vehicle maintains power to the 12 volt power recepticle after the vehicle is shut off (the
red light on the power adapter stays lit), your SKYFI3 will continue to draw power from the vehicle’s battery.
You can enable the delayed power off feature (found in the “Settings” menu under “Date andTime”) to make
the SKYFI3 turn off after a selected period of time.
ꢀꢂ
ꢀꢃ
Getting Started
Getting Started
Display - Symbols and Icons
Display - Live XM Mode
Menu Items
Listening/User
Mode
Battery Level
and charging
status
Signal Strength
Battery Charging
Battery Full
Signal Strength
0 to 3 bars
Edit Song
Direct /
Favorites
Indicator
EQ Settings
Find
Clock
Battery Low
Channel
Icon
Channel
Number
Channel Access
Channel
Info Extras
Live XM
Artist
Name
Channel
Name
Scheduled Recording
Keypad Hold
My Music
Organize
Playlists
SongTitle
My Music (MP3/WMA)
Play
Random
Info Extras
and Stock and
Random
Repeat Song
Settings
SportsTickers
Scrolls from
right to left
Repeat Song
Stored XM Song Locked
TuneSelect
ꢀ6
ꢀ7
Getting Started
Getting Started
Changing Display Appearance (Live XM Only)
Display - My Music Mode
Available Memory
Pressing the Display button toggles between regular and large font size.
Black portion indicates amount of
storage available. White portion
indicates amount of storage
taken up by locked XM songs. “!”
indicates that there is less than 3
minutes of storage available.
Battery Level
and charging
status
Listening/User
Mode
Clock
Title Bar
Shows whether
you are
Artist
Name
viewing:
•
•
•
•
•
All Songs
Artist
Category
Channel
Session
SongTitle
When in large text mode, the artist and title information will scroll. Large
text is only available when in Live XM mode.
Song Length
Elapsed
Time
Song Position
ꢀ8
ꢀꢄ
Getting Started
Getting Started
Remote Control
UsingYour SKYFi3 with an External Audio Source
You can use your SKYFi3 with an external audio source by attaching it to the
line in jack on the car cradle. Press Mode to switch to “Aux” mode and hear
audio from the external source.
Remember to pull out the clear plastic tab from the battery compartment
before using the remote. To remove the battery from the remote, use your
thumb to press the center of the battery tray and pull it out. Replace the
battery with the equivalent size and voltage, taking care to insert it with the
positive (+) side up.
Menu
Display the main
menu of functions:
Power
Line In
External
Record, Favorites,
Bookmarks, Set-
tings, My Music.
Audio Source
Play/Pause
Menu
Power
(external
audio source
and cable not
included)
Vehicle
Cradle
Volume
Arrow Keys
Mode
Select menu entries,
change channels, skip
through songs, change
categories, and more...
Press to change modes:
Live XM, Aux and My
Music
Mode
Mute
Jump
3
+
Volume
Fav/Dir
-
Fav/Dir
Select between direct
entry or favorites
Mute
1
4
2
5
6
Line Out
Jump
Return to previous
channel.
Display
Antenna
and Power
Press to change the dis-
play appearance. Press &
Hold to change the display
from vertical to horizontal
orientation.
7
8
0
9
Disp
Rec
Numbers
Enter channels
directly or select
favorites.
ꢁ0
Record
ꢁꢀ
Updating SKYFi3 Firmware
Updating SKYFi3 Firmware
Updating SKYFi3 Firmware
You can check for firmware updates at any time by plugging your device
into your computer and going to http://FWUPDT.xmradio.com. You can also
link to this page by clicking the “XM Firmware Update Client” button on the
CD’s XM+Napster menu. Download the Firmware UpdateTool to your PC
Desktop for easy access, then double-click the icon to run the tool. Follow
the onscreen instructions to download the latest firmware to your device.
While you’re running XM+Napster, connect your device to your PC and
XM+Napster will automatically show if a firmware update is available for
your device. If an update is available, follow the onscreen prompts to
download the latest firmware to your device.
NOTE: On the “Install XM+Napster” section of the CD, click on the “XM
Firmware Update Client” button to link to the Firmware UpdateTool.
Caution: Please make sure your battery is at least 80% full before updating your firmware.
ꢁꢁ
ꢁ3
Listening to Live XM
Listening to Live XM
Selecting Channels with the Car Cradle
Listening to Live XM
To listen to Live XM content, you must dock your SKYFi3 in either the car or
home cradle (home kit is sold separately), make sure the power adapter is
attached, and the antenna is connected.
Favorites /
Direct Entry
Turn on the player. You are currently listening to XM content if you see
“Live XM” on the display. If you do not see “Live XM,” toggle the Mode
button to switch to “Live XM” mode.
Assigned
Favorites
Keys and
Direct Entry
Keys
Selecting Channels
You can select channels by:
Warning:When using this product in the car, it is important to keep your eyes on the road and
your hands on the wheel. Not doing so could result in injury or death to yourself or others and/or in
property damage.
• Channel Browsing - scroll the full list of channels.
• Direct Entry - enter the channel number directly.
• Category Browsing - scroll the list of channel categories from the
channel list.
Channel Browsing
• Favorites - access your favorite channels.
Use the up and down arrows to browse through the list of XM channels.
Using the Remote Control
Channel
Browsing
1. Press the Fav/Dir button to toggle to Direct.
Direct
Entry
Favorites and
Category
Browsing from
song list
2. Press the number keys of the desired channel and press the XM button.
Channel
Browsing
ꢁꢂ
ꢁꢂ
ꢁꢃ
Listening to Live XM
Direct Entry
Listening to Live XM
Listening to Live XM
Favorites
Using the Display Keypad
Your favorite channels can be saved in an easily accessible list. Your SKYFi3
has three banks of favorites (A, B, and C).You can save 10 items in each list.
1. Press & Hold the left arrow button to access a number pad on the
display.
1. Press the Menu button and scroll to “Favorites.”
2. Press the Play/Pause button and scroll to “Add Channel.” Select the
favorites band to save to and press Play/Pause.The channel currently
playing will be added to your favorites.
To remove a channel:
1. Press the Menu button and scroll to “Favorites.”
2. Press the Play/Pause button and scroll to “Delete Channels.”
3. Press the Play/Pause button and scroll to the Favorites band (A, B, or C)
that contains the channel you wish to remove.
4. Press the Play/Pause button, select the channel from the list and press
the Play/Pause button to remove it.
2. Use the arrow buttons to highlight the digits corresponding to channel
number.
3. Press the Play/Pause button to select each digit. SKYFi3 will tune to the
Saving Favorites Using the Car Dock
channel after a two second pause.
Your favorite channels can also be saved using the car dock keypad.
Using the Car Dock
1. Tune to the channel you wish to save.
1. Press the F/D button to toggle to Direct.
2. Press the F/D button to display the favorites band you wish to save to.
3. Press the SET button to save the current channel.
2. Press the number keys of the desired channel, the channel will change
after 2 seconds, or press the Play/Pause button.
ꢁ6
ꢁ6
ꢁ7
4. Press the number of the button you wish to save the channel to.
Listening to Live XM
Listening to Live XM
AccessingYour Favorites
Playing Live XM
Your favorites can be accessed using the SKYFi3 player, the remote control,
or the car dock keys.
Once you select a channel, SKYFi3 will begin playing the content that is
being broadcast on that channel.You can pause Live XM at any time by
pressing the Play/Pause button. Press the Play/Pause button again to
continue playing the content. Content will resume playing from the location
where it was paused, as long as the content was not paused for more than
30 minutes.
Access your favorites lists using the player keys or the remote by pressing
the right arrow button to toggle through the favorites lists. Use the up and
down arrow buttons then the Play/Pause button to select the desired chan-
nel. Access your favorites lists using the car dock keys by pressing the F/D
button to select the desired favorites band. Press a number key to access
the corresponding favorites channel.
It is possible to pause and resume playing content because SKYFi3 can ac-
cess at least 30 minutes of stored XM content. SKYFi3 stores XM content
as you are listening, so if you have been listening for less than 30 minutes,
there will be less than 30 minutes of content in the buffer.You can access
this “30-minute buffer” at any time.
Category Browsing
XM channels are organized by category, for example “Rock” or “News.”
NOTE: XM InstantTraffic and Weather cannot be replayed.
1. Press the up or down arrows to display the channel list.
2. Press the right arrow button to scroll through the categories.
3. Press the up and down arrows to select a channel within a category.
4. Press the Play/Pause button to select the channel you want.
Replaying XM Content
Press the left arrow button to access the 30-minute buffer. SKYFi3 will
rewind to the beginning of the current song. If the current song has been
playing for less than 5 seconds, SKYFi3 will rewind to the beginning of the
previous song.
Use the left arrow key to exit or go to the previous
menu.
ꢁ8
ꢁꢄ
Listening to Live XM
Recording Live XM
While in the 30-minute buffer, you can:
Recording Live XM
Your SKYFi3 can record XM content while you are listening to Live XM or
by scheduling a recording session. When listening to Live XM, you can
record the current song or begin recording the current channel.You can
then listen to recorded XM anywhere with your SKYFi3 player and organize
your recorded content into playlists. Recorded XM content is for personal,
non-commercial use only and cannot be downloaded from the SKYFi3
player.To record XM content, you must dock your SKYFi3 in either the car or
home cradle, make sure the power adapter is attached, and the antenna is
connected.
• Skip from Song to Song - Press the left and right arrow buttons to skip to
the previous and next songs in the order that they played.
• Rewind - Press & Hold the left arrow button to continuously rewind. Re-
lease the button to resume playing.
• Fast Forward - Press & Hold the right arrow button to continuously fast
forward. Release the button to resume playing.
• Quick Rewind and Fast Forward - While rewinding or fast forwarding,
quickly tap the left or right arrow buttons to increase the rewind and fast
forward speed up to four speed levels. Press the Play/Pause button to
resume playing.
Recording a Single Song
1. While listening to XM, press the Menu button, scroll to “Record” in the
menu and press the Play/Pause button to select it.
Return to live XM by pressing the Menu button, selecting “Live XM,” and
then pressing the Play/Pause button.
2. Scroll to “Record Song” in the menu and press the Play/Pause button to
select it.
Express -You can also Press & Hold the Menu button
until you see “Recording” on the display.
Delayed Start Recording
You have 45 seconds from the start of the song to press “Record” and cap-
ture all of the song, as long as you have been tuned to that channel for at
least 45 seconds. The amount of time you have to record to the beginning
of the song can increase if you have been listening to the channel longer,
resulting in more content being captured in the replay buffer. SKYFi3 will
stop recording at the end of the song. Alternatively, you can press the Menu
button again to stop recording at any time.
30
3ꢀ
Recording Live XM
Recording Live XM
Using the Car Dock
To record a song using the keys on the car dock, simply press the REC but-
ton. Recording will stop at the end of the song.You can continue recording
the current channel by pressing the REC button again. Press the REC button
a third time to stop recording at any time.
Choose to schedule a session for “Today,”
for “Everyday,” or for a specific date.
Set start and stop times using the up
and down arrow buttons.
Recording a Channel
1. While listening to XM, press the Menu button, scroll to “Record” in the
menu and press the Play/Pause button to select it.
Pick the channel you want recorded.
Select “OK” to save the session.
2. Scroll to “Record Channel” in the menu and press the Play/Pause button
to select it. Press & Hold the Menu button to stop recording.
Using the Car Dock
To record a channel using the keys on the car dock, simply press the REC
button twice quickly. Press the REC button again to stop recording.
Editing a Session
1. To edit an existing session, press the Menu button, scroll to “Record” in
the menu and press the Play/Pause button to select it.
Scheduling a Recording Session
To schedule a recording session, your SKYFi3 must be on with an XM signal,
or off and in a powered home or car dock.
2. Scroll to “Record Schedule” in the menu and press the Play/Pause but-
ton to select it.
3. You will see a list of sessions. Highlight the session you wish to edit and
1. While listening to XM, press the Menu button, scroll to “Record” in the
menu and press the Play/Pause button to select it.
press the Play/Pause button.
4. Follow the on-screen instructions using the up and down buttons. Press
2. Scroll to “Record Schedule” in the menu and press the Play/Pause but-
ton to select it. Scroll to “New Session” and press the Play/Pause button
to select it.
the Play/Pause button to accept each entry.
5. To delete a session, highlight the session you wish to delete and press
the Menu button, choose “Cancel Session” and press the Play/Pause
button.
3. Follow the on-screen instructions using the up and down buttons. Press
3ꢁ
33
the Play/Pause button to accept each entry.
Listening to My Music
Listening to My Music
You can skip forward and backward through your recorded music while lis-
Listening to My Music
tening by pressing the left and right arrow keys to skip to the previous and
next song respectively.Toggle the Play/Pause button while a song is playing
to pause it and resume playing.
To listen to recorded XM content or other stored music (see “Using SKYFi3
with your PC”), switch your SKYFi3 to My Music mode by pressing the
Mode button.
AccessingYour Music
NOTE: Please make sure your battery is fully charged (three hours) before
using your SKYFi3 on battery power.
In addition to accessing a list of your songs in the order that they were
recorded, you can also access your music by artist, category, channel, and
recording session.
1. Press the up and down arrow buttons to scroll through a list of your
songs in the order that they were recorded.
1. While listing to a recorded song, press the Menu button. Scroll to “Find”
and press the Play/Pause button to select it.
2. Press the Menu button to display the Menu.
2. For this example, scroll to “Artist,” press the Play/Pause button to select
it, then scroll through the list of artists and press the Menu button to
select an artist.
Displays the Edit Menu,
Play the selected song.
allowing you to add a song
to a playlist, delete a song,
Play songs in random
order.
3. Scroll to “Select” and press the Play/Pause button to see a list of songs
or lock and unlock a song.
for that artist.
Repeat the current song.
Express -You can bypass this “Select/Edit” screen by
pressing the right arrow button or the Play/Pause button
once you have highlighted an artist.
3. Scroll to “Play” and press the Play/Pause button to play the selected
4. Scroll to the song you wish to hear and press the Play/Pause button to
song.
play it.
Express - Press Play/Pause to play a selected song from
the song list, bypassing the Menu.
3ꢂ
3ꢃ
Listening to My Music
Changing Artists
Listening to My Music
OrganizingYour Music
Playlists
1. Press the Menu button, scroll to “Find” and press the Play/Pause button
to select it.
Playlists contain a list of songs that are organized to play in a certain se-
quence. You can add a song to more than one playlist. To add a song to a
playlist, first select a song from any song list.
2. Scroll to “Artists” and press the Play/Pause button to select it.
3. Scroll through the list of artists and press the right arrow button to dis-
play the songs for that artist.
4. Scroll to the song you wish to hear and press the Play/Pause button to
1. Press the Menu button to display the Menu.
play it.
2. Scroll to “Edit Song” and press the Play/Pause button to select it. If “Edit
Song” is not on the menu, select “Find” and press the Menu button to
display the menu with “Edit Song” visible.
Changing back to “All Songs”
3. Scroll to “Add to Playlist” and press the Play/Pause button to select it.
1. Press Menu, scroll to “Find” and press the Play/Pause button to select it.
2. Scroll to “All Songs” and press the Play/Pause button to select it.
4. To add the song to an existing playlist, scroll to the desired playlist and
press the Play/Pause button to add the song to the playlist.
3. Scroll to the song you wish to hear and press the Play/Pause button to
5. To create a new playlist, scroll to “New Playlist” and press the Play/
Pause button to select it.
play it.
6. Enter the playlist name using the on-screen keypad. Highlight “OK” and
press the Play/Pause button to add the song to the playlist.
You can add all songs for an artist, category, channel, or recording session
to playlists by following the above steps from an artist, category, channel,
or recording session list.
Express - While listening to a song, press and hold the
Menu button to display a special menu which allows you
to quickly add the song to a playlist, lock, bookmark, or
delete a stored song.
36
37
Listening to My Music
Playing Songs in a Playlist
Listening to My Music
4. Scroll to “Remove Songs” and press the Play/Pause button to see the list
of songs in the playlist.
1. To select a playlist to play, press the Menu button, scroll to “Playlists”
and press the Play/Pause button to select it.
5. Scroll to the desired song and press the Menu button to select it.
6. Scroll to “Remove Song” and press the Play/Pause button to select it.
SKYFi3 will ask you to confirm that you want to remove the song from
the playlist. Scroll to “Yes” and press the Play/Pause button to confirm.
Please note that removing a song from a playlist does not delete the song
from your SKYFi3.
Deleting Songs
Deleting a song from your SKYFi3 permanently removes it from the unit.
2. Scroll to the desired playlist in the list and press the Menu button to
select it.
1. From any song list in “Playlist,” “All Songs,” “Artists,” “Categories,” etc.,
highlight the song you want to delete using the up and down arrow
buttons.
3. Scroll to “Select” and press the Play/Pause button to see the list of
songs in the playlist.
4. Scroll to the desired song and press the Play/Pause button to play it.
2. Press the Menu button, scroll to “Edit Song,” and press the Play/Pause
button to select it.
To exit a playlist and return to all songs or other categories, press the Menu
button, scroll to “Find” and press the Play/Pause button.
3. Scroll to “Delete” and press the Play/Pause button to select it.
4. SKYFi3 will ask you to confirm that you want to remove the song from
Removing Playlist Items
the playlist. Scroll to “Yes” and press the Play/Pause button to confirm.
1. To remove songs from a playlist, press the Menu button, scroll to
“Playlists” and press the Play/Pause button to select it.
Locking Songs
When your SKYFi3’s internal memory is full, subsequent recordings will
replace stored songs in the order they were recorded. You can lock songs to
prevent them from being replaced.
2. Scroll to the desired playlist in the list and press the Menu button to
select it.
38
3ꢄ
3. Scroll to “Edit Playlist” and press the Play/Pause button to select it.
Listening to My Music
PersonalizingYour SKYFi3
PersonalizingYour SKYFi3
1. From any song list in “Playlist,” “All Songs,” “Artists,” “Categories,” etc.,
highlight the song you want to lock using the up and down arrow
buttons.
You can easily adapt your SKYFi3 to suit your listening habits. Simply
press Menu to see the options you can customize. If you ever
get lost or decide not to change anything, press the left arrow button several
times to return to normal operation. Or just wait about 15 seconds and
SKYFi3 automatically cancels whatever you’re doing.
2. Press the Menu button, scroll to “Edit Song,” and press the Play/Pause
button to select it.
3. Scroll to “Lock Song” and press the Play/Pause button to select it.
Selecting Multiple Songs
Making any FM Radio an XM Radio
Your SKYFi3 contains a built-in FM transmitter that sends the XM audio
signal to an FM radio. The FM transmitter is only used in the car dock, and
is disabled when you are using headphones.
Select multiple songs in a list to delete, to lock, or to add to a playlist.
1. Press the Menu button, scroll to “Organize,” and press the Play/Pause
button to select it.
1. Find an FM frequency that is not being used by any commercial FM sta-
tion. Tune your FM radio through the FM band and note which frequen-
cy has no FM station or the least amount of interference.
2. Place SKYFi3 in the car cradle.
2. Scroll to the list you want and press the Play/Pause button to select it.
3. If you are in any list other that “All Music”, press the Menu button, scroll
to “View Songs” and press the Play/Pause button to select it.
4. Scroll to “All Songs” and press the Play/Pause button to select it.
3. Press Menu, scroll to “Settings” and press Play/Pause to select it.
4. Scroll to “FM Frequency” and press Play/Pause to select it.
5. Scroll to the first song you want and press the Menu button, then scroll
to “Select Song” and press the Play/Pause button to highlight the song.
5. Using the up and down arrow buttons, select the same FM frequency
6. Scroll to the next song you wish to select and press the Play/Pause but-
and press Play/Pause.
ton. Repeat this step for all the songs you wish to select.
7. Press the Menu button, select an action (“Delete, Song” “Add to Playlist,”
or “Lock Song”) and press the Play/Pause button to perform the action.
8. SKYFi3 will ask you to confirm your selection. Scroll to “Yes” and press
You should now hear XM programming on your FM radio. If the sound
isn’t clear or you hear noise or static, try another FM frequency. If you’re
traveling, you may need to retune periodically; this is due to the differences
in signal strength of local FM stations and is not a problem with
your SKYFi3.
the Play/Pause button to select it.
ꢂ0
The action you select will be performed on all songs you selected.
ꢂꢀ
PersonalizingYour SKYFi3
PersonalizingYour SKYFi3
Menu Functions - Quick Reference
Menu Functions - Quick Reference (continued)
Menu functions may be different from the list below based on how your
SKYFi3 is docked and what playing mode is selected.
My Music Mode
Main Menu
• Playlist - play, add, delete or rename a playlist (not shown if no playlist is
available).
• Find - access your music by artist, category, channel, and recording
session.
Live XM Mode
Main Menu
• Record - record a song, record a channel, or schedule a recording session.
• Bookmarks - bookmark the content currently playing for future purchase
from XM+Napster, using the included software.
• Favorites - add a channel or edit channels in a favorites list.
• My Music - switch SKYFi3 to My Music mode.
• Settings - access the Preferences and Set-up Menus.
• Organize - select multiple songs for deletion, to lock, or to add to a
playlist.
• Live XM - when docked, switch SKYFi3 to Live XM mode (not shown if not
docked).
• Settings - access the Preferences and Set-up Menus.
Preferences (in Settings menu)
Preferences (in Settings menu)
• EQ Set - select from a list of equalizer settings for playback of your
recorded content.
• EQ Set - select from a list of equalizer settings for playback.
• Change Display - change the backlight and brightness/contrast settings.
• Info Extras - choose the Info Extras to be displayed.
• TuneSelect - set-up a list of songs or artists that SKYFi3 will alert you of
when one of them is playing on any XM channel.
• Change Display - change the backlight and brightness/contrast settings.
Set-Up (in Settings menu)
• Channel Access - turn DirecTune on and off and modify the list of chan-
nels you see in the channel list.
• FM Audio Level - adjust the FM output (only if SKYFi3 is in the car cradle).
• Line Out Level - adjust audio line output level (not shown if headphone is
plugged in.
Set-Up (in Settings menu)
• SetTime - modify date and time settings. Delayed power off available in
car dock only.
• FM Audio Level - adjust the FM output (only if SKYFi3 is in the car cradle).
• Line Out Level - adjust audio line output level (not shown if headphones
are plugged in).
• Erase Memory - erase SKYFi3’s internal memory.
• Set Default - reset SKYFi3 to factory defaults.
• Antenna Aiming - find the strongest signal with your home antenna (not
shown when docked in the car cradle).
Use the left arrow key to exit or go to the previous menu. While your
SKYFI3 is in the car dock, use the Delayed Power Off feature in “Set
Time” to prevent battery drain in your vehicle.
• SetTime - modify date/time settings.
• Erase Memory - erase SKYFi3’s internal memory.
ꢂꢁ
ꢂ3
• Set Default - reset SKYFi3 to factory defaults.
PersonalizingYour SKYFi3
PersonalizingYour SKYFi3
Display Settings
Brightness
Audio Settings
EQ Set
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
You can set the tone quality of your SKYFi3 player to match the type of
music you are listening to.
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Change Display” and press the Play/Pause button to select it.
4. Scroll to “Brightness” and press the Play/Pause button to select it.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “EQ Set” and press the Play/Pause button to select it.
5. Select “Brightness” or “Contrast” with the up and down arrow buttons
and use the left and right arrow buttons to adjust each.
4. Use the up and down arrow buttons to select the tone type that you
6. Press the Play/Pause button to confirm your setting.
prefer and press the Play/Pause button to select it.
BacklightTimer
FM Audio Level/Line Out Level
You can change the amount of time that your SKYFi3’s screen backlight
remains lit.
Use these settings to change the audio output level that SKYFi3 is transmit-
ting to your FM radio, or sending to your stereo when connected to the Line
Out jack.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Change Display” and press the Play/Pause button to select it.
4. Scroll to “BacklightTimer” and press the Play/Pause button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
3. Scroll to “FM Audio Level” (car cradle only) or “Line Out Level” (if con-
nected and in the car or home cradle) and press the Play/Pause button to
select it.
5. Use the up and down arrow buttons to select the desired time period
and press the Play/Pause button to confirm your selection.
4. Use the left and right arrow buttons to decrease and increase the audio
See the “Getting Started - Display” section (page 7) for additional display
options.
output level and press the Play/Pause button to select it.
ꢂꢂ
ꢂꢃ
PersonalizingYour SKYFi3
TuneSelect™
PersonalizingYour SKYFi3
Info Extras
StockTicker
TuneSelect can alert you whenever one of your favorite songs or artists is
playing on any XM channel.
You can track up to 20 stock symbols and see their prices and movements
right on the SKYFi3’s display.*
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “TuneSelect” and press the Play/Pause button to select it.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Info Extras” and press the Play/Pause button to select it.
4. Scroll to “StockTicker” and press the Play/Pause button to select it.
4. Scroll to “Add Stocks” and press the Play/Pause button to select it.
4. Scroll to “Alerts” and press the Play/Pause button to toggle alerts on and
off.
5. Scroll to “Edit List” and press the Play/Pause button to select it.
6. Scroll to “AddTune Select” and press the Play/Pause button to select it.
7. Press the Play/Pause button to select “Artist” or “Song” for entry. Once
you have completed your entries, scroll to “Accept” and press the Play/
Pause button.
5. Use the arrow buttons to add each letter of the desired stock symbol.
Press the Play/Pause button after choosing each letter. (Your SKYFi3 has
a list of more than 9,000 stock symbols, and will not only help you com-
plete each entry but prevents you from entering incorrect symbols.)
As you populate the list with entries, you can follow the steps above to
accessTuneSelect, select an item from the list, press the Play/Pause button
then select options such as delete or activating alerts.
To view your stocks, press the Display button until you see “Stocks” and a
ticker scrolling across the bottom of the screen.
Saving and Retrieving Favorite Artists/Songs
Erase a Stock Symbol
1. When you hear one of your favorite songs or artists, press the Menu but-
ton, scroll to “Bookmark” and press the Play/Pause button. At the next
menu, scroll to either “Tune Select Artist” or “Tune Select Song” and
press the Play/Pause button to confirm.
Follow the same steps above to access the “StockTicker.” Scroll to “Erase
Stocks” and press the Play/Pause button to select it. Use the arrow buttons
to select the stocks to be deleted. Press the Play/Pause button to confirm
your selection.
2. When any song or artist on theTuneSelect list is currently playing on any
XM channel, your SKYFi3 will beep and flash “Artist/Song Found” on the
*Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ.
Market information is delayed by approximately 25 minutes.
ꢂ6
ꢂ7
display. Press the Play/Pause button to switch to that channel.
PersonalizingYour SKYFi3
Other Info Extras
PersonalizingYour SKYFi3
Channel Access
DirectTune
XM Satellite Radio will broadcast information such as sports scores and
other features at various times.
Normally, as you press the arrow buttons, you can preview what’s playing
on other XM channels before actually selecting a channel.To automatically
tune to a channel without having to press the Play/Pause button:
To see what is available and change your Info Extras settings:
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Info Extras” and press the Play/Pause button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Channel Access” and press the Play/Pause button to select it.
4. Use the arrow buttons to scroll the list. Items with “+” are items you
have chosen to display; items with “-” are items you have not yet se-
lected. Press the Play/Pause button to change the indicator for an item.
4. Scroll to “DirectTune,” press the Play/Pause button to select it, scroll to
“DirectTune On” and press the Play/Pause button to select it.
5. Press the Display button until you see the Info Extra items at the bottom
of the screen.
Channel Skip/Add
To simplify the list of channels you see when you access the channel list:
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Channel Access” and press the Play/Pause button to select it.
4. Scroll to “Channel Skip/Add” and press the Play/Pause button to select
it. In the list of channels, highlight and press the Play/Pause button to
skip a channel. The channel will appear in reverse type. Press the Play/
Pause button again to add a skipped channel.
ꢂ8
ꢂꢄ
PersonalizingYour SKYFi3
Using SKYFi3 andYour PC
Using SKYFi3 andYour PC
Erase Memory
To erase all internal memory on your SKYFi3:
System Requirements
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
In order to use XM+Napster and the Firmware UpdateTool, the minimum
system requirements are:
button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
• Intel® Pentium®-class CPU
• Microsoft® Windows® XP Home SP2, Windows XP Professional SP2, or
Windows 2000 SP4 operating system*
3. Scroll to “Erase Memory” and press the Play/Pause button to select it.
4. Scroll to the desired device to format and press the Play/Pause button to
select it.
• At least 64 MB of RAM
• At least 13 MB of available hard disk space for XM+Napster application
• Internet Explorer 5.1 or higher
• Windows Media® Player 9 or higher; Windows Media Player 10 recom-
mended for Windows XP
Caution: Depending on your selection, ALL stored XM content and digital
audio files on your SKYFi3 and/or MicroSD card will be erased.
• Active Internet connection; we recommend a broadband (cable, DSL, or
fiber) connection for optimal performance
Resetting Factory Defaults
You can return your SKYFi3 to the state it was shipped from the factory.
Be careful: this will erase all settings, including StockTicker, Info Extras,
presets, display options, and audio options.
You may use your SKYFi3 with a Macintosh® computer equipped with a
USB port, however, you will not be able to use XM+Napster to organize
your audio files. You will be able to copy files to your SKYFi3 directly from
the Macintosh Finder. The instructions that follow are for XM+Napster
users.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
3. Scroll to “Set Defaults” and press the Play/Pause button to select it.
* Delphi currently does not support the following operating systems: Windows 95, Windows 98, Windows NT,
Windows Me
4. Select “Restore Setting Only” to restore to factory settings. Select “Re-
store and Erase” to restore settings and erase stored information. Press
the Play/Pause button to confirm your selection.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries. Microsoft, Windows and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a trademark of
Apple Computer, Inc., registered in the U.S. and other countries.
ꢃ0
ꢃꢀ
Using SKYFi3 andYour PC
Setup
Using SKYFi3 andYour PC
4. Once installation is complete, close the
XM+Napster CD window, eject the CD, and
restart your computer. Once your computer
restarts, launch XM+Napster, plug your SKYFi3
into your PC using the USB cable, and you’re
ready to go.
1. Before you install XM+Napster, make sure that your radio is activated
and that you know your Radio ID (page 2). You’ll need it to register for
XM+Napster.
2. Make sure your SKYFi3 is not connected to your PC.
3. Insert the included CD into your computer’s CD drive. Choose the
“XM+Napster Install” option from the main menu to view the installa-
tion menu.
Warning: make sure you use the supplied
USB cable - other cables may not allow your
SKYFi3 to charge or communicate with your PC.
You can connect your SKYFi3 through a powered
USB hub. Do not use an unpowered USB hub.
NOTE: If you are using a Macintosh, your SKYFi3 will mount as an external
drive. You can copy files to your SKYFi3 using the Macintosh Finder. How-
ever, you will be unable to use XM+Napster to transfer and organize your
files.
DisconnectingYour SKYFi3
Before unplugging the USB cable, safely disconnect SKYFi3 from your PC by
using one of the following methods:
1. In Windows, right click on the “Safely Remove Hardware” icon on the
right side of the Windows taskbar. Select “USB Mass Storage Device”
and click Stop.
3. Start the installation by clicking on the “Install XM+Napster” button. Fol-
low the onscreen directions to complete the process.
2. In XM+Napster, click on the “Disconnect Device” icon or
select “File” and “Disconnect Portable Device” from the pull down
menu.
ꢃꢁ
ꢃ3
Using SKYFi3 andYour PC
Using SKYFi3 andYour PC
Registering For XM+Napster
XM+Napster Features
Once you install XM+Napster, register for XM+Napster Light or subscription
XM+Napster service.
• Transfer digital audio files between a MicroSD Card in your SKYFi3 and
your PC (MicroSD card not included)
• Manage your music, playlists, and recording sessions on your SKYFi3
• Search for and purchase music from XM+Napster
• Listen to XM Radio Online
XM+Napster Light allows you to manage XM content and digital audio files
(MP3/WMA) on your SKYFi3’s MicroSD card, purchase songs and/or albums,
and listen to more than 70 stations on XM Radio Online.
Check out XM+Napster’s Help Menu for more information.
In addition to these features, subscription XM+Napster allows you to down-
load and listen to Napster’s entire music library for a monthly fee.
Go to the Library to view
and manage all of your
content.
1. To register, open XM+Napster and click on the File drop-down menu.
Select the “Sign In” option.
Drag and drop tracks or albums to
play them on your PC
2. Click the link next to “Not a Registered Member?”
Quickly sort
through all of
the music on
your PC and
your SKYFi3.
3. Enter your unique member information, then continue on to the Billing
page. If you’d like to sign up for XM+Napster Light, select I’ll skip my
FreeTrial and start Napster Light at the lower right of the Billing page.
(Note:You do not need to enter billing information when you sign up for
XM+Napster Light.)
The next time you use XM+Napster, sign in using your user name and
password.
View all of your song information
on one big screen for easy
organization.
Transfer content to your SKYFi3
ꢃꢂ
ꢃꢃ
Using SKYFi3 andYour PC
Transferring Content
Using SKYFi3 andYour PC
Using Digital Audio Files from CD
You must have an optional (sold separately) MicroSD card installed into the
SKYFi3 to transfer content.
Convert (rip) tracks from an audio CD to your XM+Napster library:
1. Insert an audio CD into your CD drive.
1. Connect the SKYFI3 to your computer with the included USB Cable.
2. Click the “Library” button, then click on the CD listed in the folders pane.
a. DirectTransfer: Your computer must be compatible with a “Mass
Storage Class USB Device.” To transfer files to the SKYFI3, copy
and paste files from your personal folder on your computer into
the MicroSD card which can be found in “My Computer” for Win-
dows users or on the Desktop for Macintosh users.
3. You will see a list of the tracks in the main pane. Click the “Rip” button
on the bottom of the main pane.
Import tracks you have converted into your XM+Napster library by clicking
“File” and selecting “ImportTracks to My Library...”
b. XM+Napster: You may also transfer your personal music files to
an optional (sold separately) MicroSD card using the XM+Napster
software by dragging and dropping content in the transfer pane.
You can transfer individual tracks or playlists that you have pur-
chased or ripped from audio CDs.
You may also transfer directly to your MicroSD Card through a MicroSD
Card reader (sold separately).
Burn digital audio files to CD or DVD:
1. Insert a recordable CD or DVD in your CD/DVD drive.
2. Click the “Library” button, then expand the Burn pane at the bottom of
the screen.
Using an optional (sold separately) MicroSD Card Reader:
Please refer to your MicroSD card reader manual for installation instruc-
tions.Your computer must be compatible with a “Mass Storage Class USB
Device.” To transfer files to the SKYFi3, copy and paste files from your per-
sonal folder on your computer to the MicroSD card which can be found in
“My Computer” for Windows users or on the Desktop for Macintosh users.
3. Drag and drop tracks into the Burn pane and click “Burn Disc” when you
are ready.
Software features are subject to change without notice.
Delphi recommends that you DO NOT create or add songs more then eight
folders (also known as directories) from the root folder of the MicroSD card.
Folder and file names should be limited to a maximum of 128 characters.
Delphi recommends that you keep your songs in the “My Music” Folder.
Listening to XM Radio Online
To access XM Radio Online, click on the “Home” button, select “Radio,” then
select “XM Radio Online.” Choose a channel from the channel list.
ꢃ6
ꢃ7
OtherThingsYou Should Know
OtherThingsYou Should Know
Troubleshooting
OtherThingsYou Should Know
Your SKYFi3 should provide you with trouble-free performance without
needing any servicing. If it does not appear to be working properly, first try
to remedy the problem by following these steps:
Care
You should be able to use your SKYFi3 during most of your daily activities.
However, you should remember:
1. Attach all connections firmly and securely.
2. Ensure the cigarette lighter adaptor or auxiliary power socket is clean
and free of corrosion.
Caution: Refrain from using food or drinks
near your SKYFi3. Spilling food or drinks
on the unit can damage it. Also, improperly
installing the antenna cable can cause leaks,
which can damage your SKYFi3 and/or your
vehicle.
3. Check the adaptor fuse by unscrewing the ribbed end of the adaptor. If
required, replace with a 2-Amp fuse only.
If you are having problems with reception, please check page 13 for antenna
positioning information.
If you see this on the display:
No Signal
You should:
• If your SKYFi3 does get dirty, wipe the case with a soft cloth (lightly
moistened with water if necessary), then wipe dry with another cloth.
Avoid chemicals such as paint thinner, alcohol, or abrasive cleansers.
• It is best to keep your SKYFi3 out of direct sunlight or other sources of
extreme heat.
Something is blocking the XM signal. Move your
docked SKYFi3 away from the obstructed area, e.g. an
underground garage.
Check Antenna
Off Air
Plug the antenna into the home or vehicle cradle.
Make sure the antenna wire is not bent or broken.
The channel you’ve selected is not currently broadcast-
ing.Tune to another channel.
Accessories (sold separately)
We’re always developing useful and clever accessories for your SKYFi3 such
as a home kit, signal repeater, live wearable kit, and additional car kit. Visit
purchase accessories.
Loading
Your SKYFi3 is acquiring audio or program information
from the XM signal. This message should disappear in
a few seconds in good signal conditions.
ꢃ8
ꢃꢄ
OtherThingsYou Should Know
OtherThingsYou Should Know
If you see this on the display:
Updating
You should:
If this happens:
You should:
XM is updating your SKYFi3 with the latest encryption
code. Simply wait a few seconds until the update is
done. – OR –You may be attempting to tune to a chan-
nel that is blocked or that you cannot receive with your
subscription package.To receive that channel, contact
XM Satellite Radio at 1.800.967.2346.
There is no power or your
SKYFi3 shuts off quickly
Your SKYFi3 battery may be low. Charge the battery by
docking SKYFi3 in the cradle and plugging in the power
adapter.
SKYFi3 shuts off unexpectedly
Check whether you set the sleep timer, and set it to
“Off” if desired. SKYFi3 remembers the sleep timer set-
ting even when you turn the player off.
--(no artist or title)
Channel
No program information such as artist name or song
title exists.
You do not receive all the XM
channels you have subscribed
to
Check that you have not skipped any channels. If you
still do not receive all channels, your SKYFi3 may not be
activated. Contact XM Satellite Radio.
You are attempting to tune to a channel that is not
available.
No audio.
Check all connections.
All Recording Features Not
Available
Activate your XM subscription to enable you to store
XM programming on your SKYFi3.
No song title or artist name is
displayed
Nothing is wrong with your SKYFi3.That informa-
tion may be in the process of being updated. Some
channels, such as news and sports, may not have such
information.
This Channel Not Available for
Recording
Some programming cannot be recorded due to restric-
tions placed by the content owners.
This Program Not Available for
Recording
Some programming cannot be recorded due to restric-
tions placed by the content owners.
No audio when listening to
SKYFi3 through an FM radio
Check that your SKYFi3 and radio are tuned to the same
frequency. Make sure that your SKYFi3 is in the car
cradle. Make sure your headphones are not plugged in.
Connect to XM Antenna Within
## Days to Avoid Interruption in
Listening to XM Recordings
You must dock your SKYFi3 in its cradle, with the
antenna connected, and power it on for at least 8 hours
a month. This authenticates your XM subscription and
ensures that you can continue to enjoy your recorded
XM content and live XM programming.
Audio fades or has static when
listening through an FM radio
You might be hearing interference from another FM
station. Set your SKYFi3 and your radio to a different
FM frequency.
Audio sounds too soft or is
distorted when listening to an
FM radio
Raise or lower the FM Audio Level until the sound
quality improves.
Please connect to XM Antenna
to Confirm Valid Subscription
Dock your SKYFi3 in its cradle and connect the antenna.
Nothing is wrong with your SKYFi3.These channels
sound different because they are broadcast in a differ-
ent audio mode.
Activation Required for
Playback
Activate your XM service by contacting XM at
(1.800.967.2346).
XM InstantTraffic and Weather
channels sound different from
other channels
Controls do not respond
Check whether the power switch is in the ‘hold’ posi-
tion. If so, slide it to the center position to unlock the
controls.
60
6ꢀ
OtherThingsYou Should Know
OtherThingsYou Should Know
Specifications
If this happens:
You should:
The controls still do not
respond, the display does not
change, or the backlight does
not turn on or off
Reset your SKYFi3 by pressing and holding the volume
button and pressing the mode button.
SKYFi3 Player:
Dimensions
Weight
110mm x 18mm x 62mm
115g
Replay does not work with XM
Instant Traffic and Weather
Nothing is wrong with your SKYFi3.These channels use
a different audio technology than the other XM chan-
nels and cannot be recorded in the replay buffer.
Storage Capacity
256 MB internal flash, 32 MB internal RAM, 2 GB
MicroSD card (maximum recognizable); Delphi recom-
mends SanDisk brand for maximum performance
Battery level meter doesn’t
match the expected charge or
playback time
Fully charge the battery, then use your SKYFi3 until the
battery is exhausted.This calibrates the battery level
meter.
Music file formats
Audio output
MP3, WMA, Napster
variable through 3.5mm jack
SMB
SKYFi3 does not communicate
with your PC
Check the power and USB connections between the
cradle and your PC. Be sure to use the supplied USB
cable, any others may prevent your SKYFi3 from charg-
ing or communicating with your PC. Connect your
SKYFi3 directly to the PC or to a powered USB hub; do
not use an unpowered USB hub. Remove your SKYFi3
from its cradle, then re-insert.
Antenna connector (home and
car cradles)
Battery
Lithium Ion
5V DC
External power
Remote
Artist and song title information SKYFi3 may not correctly show the artist and song
does not display correctly information (ID3 tags) of certain foreign songs.
Dimensions
Battery
96mm x 43mm x 12mm
Cannot transfer songs that were SKYFi3 is not compatible with NapsterTo Go’s monthly
downloaded with NapsterTo
subscription service.To transfer songs from your PC to
SKYFi3, you must purchase individual songs or albums
from XM+Napster Light or XM+Napster.
Lithium 3V - Maxell cr2032
Go™ into SKYFi3
Headphone
HeadphoneType
3.5mm headphone jack
6ꢁ
63
OtherThingsYou Should Know
Model Numbers
Warranty
Warranty
SKYFi3 Receiver with Car Kit
SKYFi3 Home Kit
SA10224
SA10227
SA10226
Delphi Limited ConsumerWarranty - United States of America
Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite
Radio Products sold by Delphi Automotive Systems (each “Product”) to be
free of defects in material and workmanship, subject to the following condi-
tions:
SKYFi3 Car Kit
SKYFi3 Wearable Live Kit
SA10252
SA10228
SKYFi3 Wearable Live Kit with Extended Life Battery
Subject to express limitations with respect to the battery and ear bud com-
ponents of any Product, the duration of Delphi’s warranty with respect to
each Product is limited to one (1) year from the date of sale to the original
consumer purchaser. The duration of Delphi’s warranty with respect to the
battery and ear bud components of any Product is limited to thirty (30) days
from the date of sale to the original consumer purchaser.
ContactingTechnical Support
For additional information regarding your SKYFi3, contact DelphiTechnical
Support at 1.877.GO.DELPHI (1.877.463.3574),
8:00 a.m. — 8:00 p.m. EasternTime, Monday — Friday.
10:00 a.m. — 4:00 p.m. EasternTime, Saturday and Sunday.
No other express warranties are made with respect to any Product. All
implied warranties, including warranties of merchantability and fitness
for a particular product are limited to the warranty period set forth above.
This warranty is not transferable and applies only to the original consumer
purchaser of the Product.
Delphi will, as its sole obligation under this warranty, replace or repair, at its
option, any Product that does not conform to this warranty. Products may
be repaired or replaced with new or with refurbished items.This limited
warranty does not cover defects in appearance, cosmetic or decorative
items, including any non-operative parts. Under no circumstances will
Delphi be liable for any incidental or consequential damages under this war-
ranty or any implied warranties.
6ꢂ
6ꢃ
Warranty
Warranty
These remedies are the customer’s exclusive remedies for
breach of warranty.This limited warranty only extends to
customers who purchase the Products in the United States.
HowYou (the Customer) Can Get Service
To obtain warranty service during the first thirty (30) days after the date of
purchase, you must return the defective Product with the original receipt to
the original place of purchase. To obtain warranty service during the first
thirty (30) days for Products purchased specifically from
Delphi will not be responsible for damage resulting from any
• (i) deviation of Delphi’s operating instructions as printed in Delphi’s
provided on your invoice. For all Products for the remainder of the limited
warranty period, you must contact Delphi by phone at 1.877.GO.DELPHI
(1.877.463.3574). If further clarification or additional information is required
from Delphi, you may call Delphi at 1.877.GO.DELPHI (1.877.463.3574).
catalog or on any packaging, labels or other literature provided with a
Product,
• (ii) installation of a Product in a manner which is inconsistent with
Delphi’s written instructions,
• (iii) alteration or modification of a Product,
• (iv) misuse,
• (v) neglect,
• (vi) abuse,
• (vii) accident,
If warranty service is needed at any time during the warranty period, the
purchaser will be required to furnish a sales receipt/proof of purchase indi-
cation the date of purchase, amount paid and place of purchase. Customers
who fail to provide such proof of purchase will have the Product returned
to them or will be charged for the repair/replacement of any Product. The
customer is responsible for shipping the Product to an authorized Delphi
Warranty Facility.
• (viii) normal wear and tear,
• (ix) commercial use,
• (x) improper storage,
• (xi) environmental conditions, including excessive temperature or
humidity,
• (xii) service by anyone other than a Delphi authorized repair facility,
• (xiii) use of the Product in conjunction with any non-Delphi branded ac-
cessory,
• (xiv) other improper application, installation or operation of this Product,
or
*You must remove the “Memory Card” from your SKYFi3 before returning
the Product.
How State Law Relates to theWarranty
Some states do not allow limitations on the duration of implied warranties,
or the exclusion or the limitation of incidental or consequential damages.
So the above limitations or exclusions may not apply to you.This warranty
gives you specific legal rights.You may also have other rights that may vary
from state to state. NO PERSON IS AUTHORIZED BY DELPHITO MODIFY
OR ADDTOTHIS LIMITED WARRANTY.
• (xv) defects or malfunctions of which Delphi is not advised within ten (10)
days of the expiration of the limited warranty period.
66
67
Warranty
Warranty
Delphi will not be responsible for damage resulting from any
• (i) deviation of Delphi’s operating instructions as printed in Delphi’s
Delphi Limited ConsumerWarranty - Canada
catalog or on any packaging, labels or other literature provided with a
Product,
• (ii) installation of a Product in a manner which is inconsistent with
Delphi’s written instructions,
• (iii) alteration or modification of a Product,
• (iv) misuse,
• (v) neglect,
• (vi) abuse,
• (vii) accident,
• (viii) normal wear and tear,
• (ix) commercial use,
Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite
Radio Products sold by Delphi (each “Product”) to be free of defects in ma-
terial and workmanship, subject to the following conditions:
Subject to express the limitations with respect to the battery and ear bud
components of any Product, the duration of Delphi’s warranty with respect
to each Product is limited to one (1) year from the date of sale to the original
consumer purchaser. The duration of Delphi’s warranty with respect to the
battery and ear bud components of any Product is limited to thirty (30) days
from the date of sale to the original consumer purchaser.
• (x) improper storage,
• (xi) environmental conditions, including excessive temperature or humid-
ity,
• (xii) service by anyone other than a Delphi authorized repair facility,
• (xiii) use of the Product in conjunction with any non-Delphi branded ac-
cessory,
Delphi makes no express warranties with respect to any Product except as
set forth herein. All implied conditions and warranties, including the implied
conditions and warranties of merchantable quality and fitness for a particu-
lar product are limited to the warranty period set forth above.This warranty
is not transferable and applies only to the original consumer purchaser of
the Product.
• (xiv) other improper application, installation or operation of this Product,
or
• (xv) defects or malfunctions of which Delphi is not advised within ten (10)
days of the expiration of the limited warranty period.
Delphi will, as its sole obligation under this warranty, replace or repair, at its
option, any Product that does not conform to this warranty. Products may
be repaired or replaced with new or with refurbished items.This limited
warranty does not cover defects in appearance, cosmetic or decorative
items, including any non-operative parts. Under no circumstances will
Delphi be liable for any loss of revenue, loss of profits or failure to realize
expected savings (collectively, “Economic Loss”) under this warranty or any
implied conditions or warranties.These remedies are the customer’s exclu-
sive remedies for breach of conditions or warranty.This limited warranty
only extends to customers who purchase the Products in Canada.
68
6ꢄ
Warranty
HowYou (the Customer) Can Get Service
To obtain warranty service during the first thirty (30) days after the date of
purchase, you must return the defective Product with the original receipt to
the original place of purchase.To obtain warranty service for all Products for
the remainder of the limited warranty period, you must contact Delphi by
phone at 1.877.GO.DELPHI (1.877.463.3574). If further clarification or addi-
tional information is required from Delphi, you may call Delphi at
1.877.GO.DELPHI (1.877.463.3574).
If warranty service is needed at any time during the warranty period, the
purchaser will be required to furnish a sales receipt/proof of purchase indi-
cating the date of purchase, amount paid and place of purchase. Customers
who fail to provide such proof of purchase will have the Product returned to
them or be charged for the repair/replacement of any Product.
*You must remove the “Memory Card” from your SKYFi3 before returning
the product.
How Provincial Law Relates to theWarranty
Some provinces do not allow limitations on the duration of implied condi-
tions or warranties, or the exclusion or the limitation of Economic Loss.
So the above limitations or exclusions may not apply to you.This warranty
gives you specific legal rights.You may also have other rights that may vary
from province to province.
NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADDTOTHIS
LIMITED WARRANTY.
70
|