EN
User manual
2
Ceramic glass induction hob
ZIT64X
Installation
Before the installation , note down this data from the Protect the cut surfaces of the worktop against moisture
rating plate:
• Model description (Modell)................
• Product number (Prod. Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the appliance on its lower
casing.
with a correct sealant!
Seal the appliance to the work top with no space left with
a correct sealant!
Protect the bottom of the appliance from steam and
moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to doors and below
windows! If not, hot cookware can be hit off the hob when
you open doors or windows.
ZIT64X
58 GAD D5 AU
949 594 115 00
Induction 7,4 kW
7,4 kW
220-240 V 50-60-Hz
Warning! Risk of injury from electrical current.
Carefully obey the instructions for electrical
connections.
ZANUSSI
Safety instructions
• The electrical mains terminal is live.
Warning! You must read these!
• Make electrical mains terminal free of voltage.
• Install correctly to give anti-shock protection.
• Loose and incorrect plug and socket connections can
make the terminal become too hot.
• A qualified electrician must install the clamping con-
nections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single-phase or two-phase con-
nection.
• Replace the damaged mains cable with a special cable
(type H05BB-F Tmax 90°C; or higher). Speak your lo-
cal Service Force Centre.
The appliance must have the electrical installation which
lets you disconnect the appliance from the mains at all
poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the hold-
er), earth leakage trips and contactors.
Make sure that the appliance is not damaged
because of transportation. Do not connect a damaged
appliance. If it is necessary, speak to the supplier.
Only an authorised service technician can install, connect
or repair this appliance. Use only original spare parts.
Only use built-in appliances after you assemble the
applianceintocorrectbuilt-in unitsandworksurfacesthat
align to the standards.
Do not change the specifications or modify this product.
Risk of injury and damage to the appliance.
Fully obey the laws, ordinances, directives and standards
in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules
etc.)!
Keep the minimum distances to other appliances and
units!
Install anti-shock protection, for example install the
drawers only with a protective floor directly below the
appliance!
3
Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
R 5mm
600mm
490+1mm
560+1mm
min.
min.
25 mm
38 mm
min.
min.
min.
20 mm
5 mm
5 mm
4
Description of the appliance
Cooking surface layout
1
2
1
2
3
Induction cooking zone 1800W
Induction cooking zone 1800W
Induction cooking zone 1400 W, with Power function
2500W
Control panel
Induction cooking zone 2300W, with the Power func-
tion 3700W
180
180
mm
mm
145
4
5
210
mm
3
mm
5
4
Control panel layout
1
2
3
4
5
6
B
B
9
8
7
Use the sensor fields to operate the appliance.
sensor field
function
1
2
3
4
5
6
7
8
9
starts and stops the hob
locks/unlocks the control panel
shows the heat setting
with an indicator
a heat setting display
cooking zones' indicators of timer
the timer display
shows for which zone you set the time
shows the time in minutes
increase or decrease heat setting
increase or decrease the time
selects the cooking zone
/
/
activates the Power function
5
Heat setting displays
Displays and sounds tell which functions are started
Display
Description
The cooking zone is off
The cooking zone operates
-
Keep warm setting is on
The Automatic heat up function is on
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
Power function is active
The automatic switch off is active
ceramic is slightly heated by the residual heat of the
cookware.
Residual heat indicator
Warning!
Risk of burns from residual heat!
The induction cooking zones make the heat necessary for
cooking directly in the bottom of the cookware. The glass
Operating the appliance
• the hob gets too hot (e.g. when a saucepan boils dry).
Before you use the hob again, the cooking zone must
be cool.
Usetheinductioncookingzoneswithsuitablecook-
ware.
On and Off
•
you use incorrect cookware.
comes on in the dis-
Touch
for 1 second to start or stop the appliance.
play and after 2 minutes the cooking zone stops auto-
matically.
• you do not stop a cooking zone or change the heat
Automatic Switch Off
The function stops the hob automatically and if:
setting. After some time
stops. See the table.
comes on and the hob
•
all cooking zones are off
.
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth,
etc.) for longer than 10 seconds. The sound operates
until you remove the object.
Automatic Switch Off times
Heat setting
-
-
-
Stops after
6 hours
5 hours
4 hours
1.5 hours
6
The heat setting
Touch
cooking zone.
and
at the same time to switch off the
Touch
to increase the heat setting. Touch
to de-
creasetheheatsetting. Thedisplayshowstheheatsetting.
The automatic heat up function
The automatic heat up function adds more power to the
cooking zones and you can get a necessary heat setting
in a shorter time. The automatic heat up function starts
11
10
9
when you set a heat setting starting from
. A cooking
zone operates with the maximum power for some time
and than automatically switches back to the heat setting
you set.
8
7
6
5
4
If you set a higher heat setting during the automatic heat
up (for example from
adjusts.
to
), the automatic heat up
If there is still residual heat on the cooking zone (display
), the automatic heat up does not start.
The time of the automatic heat up changes for different
heat settings:
3
2
1
0
1
2
3
4
5
6
7
8
9
You can set the heat setting before or after you set the
timer.
Switching the Power function on and off
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After that the induction cooking
zone automatically switches back to the highest heat set-
•
Selection of the cooking zone: touch
again and
again until the indicator of a necessary cooking zone
comes on.
ting. To switch on, touch
off, touch or
,
comes on. To switch
•
Starting or changing the timer: touch
or
of the
.
timer to set the time ( minutes). When the
-
00 99
indicator of the cooking zone flashes slower, the time
counts down.
Power management
The power management di-
vides the power between two
cooking zones in a pair (see
the figure). The power func-
tion increases the power to
the maximum level for one
cooking zone in the pair and
automatically decreases in
the second cooking zone to
•
Stopping the timer: select the cooking zone with
and touch
to switch off the timer. The remaining
time counts backwards to
cooking zone goes out.
. The indicator of the
00
• Checking the remaining time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the remaining time.
When the time elapses, the sound operates and 00
flashes. The cooking zone switches off.
a lower power level. The display for the reduced zone
alternates.
•
Stopping the sound: touch
You can use the timer as a minute minder while cooking
zones do not operate. Touch . Touch or of the
timer to select the time. When the time elapses, the sound
operates and flashes.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
Set the timer after the selection of the cooking zone.
00
7
•
Locking / unlocking the control panel
You can lock the control panel, but not
Touch
until the acoustic signal. . The symbol
comes on. Switch off the appliance.
. It prevents
an accidental change of the heat setting during a cooking
session.
Switching off the child safety device
•
Start the hob with
the acoustic signal. comes on
• Switch off the appliance.
Overriding the child safety device for one cooking session
.
comes on. Touch
until
Touch the symbol
seconds.
. The symbol
comes on for 4
The Timer still operates.
Touch the symbol to switch off this function. The heat
setting that you set before comes on.
When you switch off the appliance, you also switch off
this function.
•
•
Start the hob with
. The symbol
comes on.
Touch until the acoustic signal. The symbol
comes on. Set the heat setting in less than 10 sec-
onds. You can operate the hob. When you stop the hob
The child safety device
This function prevents an accidental operation of the hob.
with
, the child safety device operates again.
Starting the child safety device
•
Start the hob with
. Do not set the heat settings .
Helpful hints and tips
Cookware for induction cooking zones
Operating noises
If you can hear
• cracking noise: cookware is made of different materials
(Sandwich construction).
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
• whistling: you use one or more cooking zones with
high powerlevels and thecookware is made ofdifferent
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic,
porcelain.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the
highest heat setting..
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start
it.
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and
flat as possible.
Cookware dimensions : induction cooking zones adapt to
thedimensionofthebottomofthecookwareautomatically
to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approxi-
mately 3/4 of the cooking zones.
Examples of cooking applications
The data in the table is for guidance only.
8
Heat
Use to:
Time
Hints
setting
Keep cooked foods warm
as re-
quired
Cover
1
1-2
Hollandaise sauce, melt: butter, chocolate, ge- 5-25 min Mix occasionally
latine
1-2
2-3
3-4
4-5
4-5
6-7
Solidify: fluffy omelettes, baked eggs
10-40
min
Cook with a lid on
Simmer rice and milkbased dishes, heating up 25-50
ready-cooked meals
Add at least twice as much liquid as rice,
stir milk dishes part way through
min
Steam vegetables, fish, meat
20-45
min
Add a few tablespoons of liquid
Use max. ¼ l water for 750 g of potatoes
Up to 3 l liquid plus ingredients
Turn halfway through
Steam potatoes
20-60
min
Cook larger quantities of food, stews and soups 60-150
min
Gentle fry: escalope, veal cordon bleu, cutlets, as re-
rissoles, sausages, liver, roux, eggs, pancakes, quired
doughnuts
7-8
9
Heavy fry, hash browns, loin steaks, steaks
5-15 min Turn halfway through
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
The Power function is suitable for heating large quantities
of water.
starch), acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest temperatures and
do not brown food too much.
Information on acrylamides
Important! According to the newest scientific knowledge,
if you brown food (specially the one which contains
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
ceramic scraper. Put the scraper on the glass ce-
ramic surface at an acute angle and slide the blade
on the surface.
– Stop the appliance and let it cool down before you
clean: limescale rings, water rings, fat stains, shi-
ny metallic discolorations. Use a special cleaner
for glass ceramic or stainless steel.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have
no effect on how the appliance operates.
2. Clean the appliance with a damp cloth and some de-
tergent.
3. At the end rub the appliance dry with a clean cloth.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil,
and food containing sugar. Use a special glass
9
What to do if...
Problem
Possible cause and remedy
You cannot start the appliance or op- • You touched 2 or more sensor fields at the same time. Only touch one
erate it.
sensor field.
• There is water or fat stains on the control panel. Clean the control panel.
• The child safety device or key lock operates. See the chapter Operating
the appliance.
• Start the appliance again and set the heat setting in 10 seconds.
The cooking zone reduces the heat
setting to
You covered one or more sensor fields or there is water or fat stains on the
control panel. Uncover the sensor fields. Clean the control panel.
A sound operates when the appliance You covered one or more sensor fields. Uncover the sensor fields.
is off.
The residual heat indicator does not The cooking zone is not hot because it operated only for a short time. If the
come on.
cooking zone is supposed to be hot, speak to the After Sales Service.
Heat setting alternates
The Power management is active. See the section Power management.
A sound operates and appliance starts
and stops again. After 5 seconds one
more sound operates.
You covered
. Uncover the sensor field.
• The automatic switch-off operates. Stop the appliance and start it again.
comes on
• Overheating protection for the cooking zone operates. Switch off the
cooking zone. Switch on the cooking zone again.
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
comes on
• The diameter of the bottom of the cookware is too small for the cooking
zone. Move cookware to a smaller cooking zone.
There is an error in the appliance.
and number come on.
come on
Disconnect the appliance from the electrical supply for some time. Discon-
nect the fuse from the electrical system of the house. Connect again. If
comes on again, speak to the After Sales Service.
There is an error in the appliance, because a cookware boils dry or you use
not correct cookware. Overheating protection for the cooking zone operates.
The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After approximately 30
seconds switch on the cooking zone again.
should disappear, residual
heat indicator can stay. Cool down thecookware and check it with the section
Cookware for the induction cooking zone.
If you tried the above solutions and cannot repair the
If you operated the appliance incorrectly, the servicing by
problem, speak to your dealer or the Customer Care De- a customer service technician or dealer will not be free of
partment. Give the data from the rating plate, three-digit- charge, even during the warranty period. The instructions
letter code for the glass ceramic (it is in the corner of the about the customer service and conditions of guarantee
cooking surface) and an error message that comes on.
are in the guarantee booklet.
10
Environment concerns
information about recycling of this product, please
contactyourlocalcouncil,yourhouseholdwastedisposal
service or the shop where you purchased the product.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
Packaging material
The packaging materials are friendly to the envi-
ronment and can be recycled. The plastic compo-
nents are identified by marking: >PE<,>PS<, etc. Discard
the packaging materials as household waste at the waste
disposal facilities in your municipality.
11
To buy accessories, consumables and spare parts at our online shop please visit:
|